bolted joint
英 [ˈbəʊltɪd dʒɔɪnt]
美 [ˈboʊltɪd dʒɔɪnt]
网络 螺栓连接; 螺栓接合; 螺栓接头
双语例句
- The specimen and corresponding fixture have been designed, and the fatigue experiment of composite component with bolted joint has been carried out.
设计了试验件和相应的夹具，开展了复合材料层合板螺栓连接结构的部件疲劳实验。 - What a man needs in gardening be a cast-iron back, with a hinge in it. Analysis of partially restrained moment at bolted connection joint of steel beam to concrete wall
做园艺工作的人，得要有铸铁制的脊梁，再加上一道铰链。钢梁-混凝土墙铰结连接节点嵌固弯矩的分析与计算 - Analysis of partially restrained moment at bolted connection joint of steel beam to concrete wall
钢梁-混凝土墙铰结连接节点嵌固弯矩的分析与计算 - FEM Analysis of Bearing Pressure at Bolted Joint for the Heterogeneous Bolt with the Internal Radius
异形内R型螺栓头部支承面压力有限元分析 - Allowable Bearing Strength of Bolted Joint in MultiDirectional Laminates of Cabon/ Epoxy
碳/环氧多向迭层板螺接件的许用挤压强度 - Study on Energy Dissipation of Axial Vibration in Bolted Joint
螺栓连接接口轴向振动能量耗散特性研究 - Strength studies on non-even distribution bolted joint in composite laminates
复合材料非均匀分布多钉连接强度研究 - Bolted Joint Models of Finite Element Assemblies
装配体结构有限元分析中的螺钉连接模型 - In this paper, tests on a new type of hollow bolted sphere joint designed by the method of orthogonal were analyzed.
本文研究了运用正交设计方法安排的新型空心螺栓球节点试验。 - Necessity for fatigue design of bolted joint in a steel structure is discussed in this paper, method of load calculation and fatigue design of bolted joint bearing variable axial load is introduced, and an example analysis is provided.
本文论述了金属结构中螺栓联接抗疲劳设计的必要性，介绍了受轴向变载荷作用的螺栓联接载荷计算及疲劳设计的方法，并用实例进行了分析论证。 - The engineering survey and construction process and method of bolted ball joint net frame are introduced, and good result has been achieved.
介绍了施工现场的工程概况及螺栓球节点网架的施工工艺和施工方法，并收到了良好效果。NET技术的解决方案。 - Mechanical analyses of the bolted joint for walking beam and equalizer bearing on an air-balanced pumping unit are carried out.
对气平衡抽油机游梁与横梁轴承座螺栓联接的受力及螺栓受力作了分析。 - Based on the microscopic characteristics of contacting surface in bolted joint, the contacting types are classified as two tapes, that is, the peak-peak contacting and tangent peak-valley contacting. A dynamic model of axial vibration in bolted joint is presented.
根据螺栓连接接触面的轴向接触微观特征，将接触面的接触方式分为峰-峰接触和峰-谷切向接触，提出了螺栓连接轴向振动的动力学模型。 - The experiment results show that different volume of bolt tightening torque will cause an change in fretting damage degree for bolted joint, and coating glue on its faying surface will be a good method to protect bolted joint from fretting damage.
试验结果表明，螺栓预紧力矩大小的改变会引起螺栓联接件不同程度的微动损伤，而在联接板面间进行涂胶防护是防止其产生微动损伤的一种较好的方法。 - A Test Research on Fretting Damage of Bolted Joint and Its Coating Glue Protection
螺栓联接件的微动损伤及其涂胶防护试验研究 - Nonlinear Model of Bolted Joint and Its Wave Energy Dissipation
螺栓接头非线性模型及其波能耗散 - This article studies the influence of the bolt tightening torque on the fretting damage of LY12CZ aluminium alloy double shear lap bolted joint by experimental and conumerical analysis.
从试验和数值分析两个方面研究了螺栓预紧力矩对LY12CZ铝合金双盖板对接螺纹联接件微动损伤的影响。 - Combined with experimental results, a simplified mechanics model for the elasto plastic analyze of the new type of hollow ball bolted joint is built in the paper.
本文结合试验研究的成果，建立了新型空心螺栓球节点弹塑性分析的简化力学模型。 - Behaviour of Bolted Joint in Timber; Structure and Design Formulae
木结构螺栓连接的承载能力&对国际标准化协会木结构设计规范螺栓连接计算公式的建议 - Results showed that the ductility of bolted splice joint is much better than that of the welded one;
试验结果表明：螺栓拼接节点的延性远好于梁柱焊缝连接； - The Experimental And Analytical Study On The Strength Of The Non-Even Distribution Bolted Joint subjected to the mechanical loading In Composite Laminate.
本文从试验和分析两方面研究了复合材料非均匀分布多钉连接强度。 - 3-D Finite Element Simulation of Bolted Flange Joint Considering Gasket Nonlinearity
考虑垫片非线性时法兰接头性能的三维有限元模拟 - A Study on the Tangential Dynamic Characteristic Parameters of Bolted Joint
螺栓结合部切向动态特性参数的实验研究 - Computer aided design of bolted joint
螺栓联接的计算机辅助设计 - Theoretical and Experimental Study on A Bolted Flanged Joint with Nonlinear Gasket
具有非线性垫片的螺栓法兰连接的理论计算与实验研究 - Fatigue Design of Bolted Joint in a Steel Structure
金属结构中螺栓联接的疲劳设计 - The shear resistance of bolted joint can be obviously improved by higher ratio of bolt section to bolted joint area and inclined bolt.
倾斜锚杆加固的节理抗剪强度比垂直锚杆大，提高锚固面积比能显著提高节理抗剪强度。 - For the motor frame model, there is Bolted Joint Surface between the cover and the frame, the frame and the base.
在电机机座模型中，螺栓结合面存在于电机端盖和圆筒、圆筒与底座之间。 - The Bolted Joint Surface is widely used in mechanism, which has a big influence on the static and dynamic characteristics of the whole machine system.
螺栓结合面是机械结构中被广泛使用的一种连接形式，它对机械结构的静态特性、动态特性有着重要的影响。 - But in fact, the bolted joint is a structure with some prestress, and having certain nonlinear properties.
但由于螺栓固定结合面具有一定的预载，并且呈现出一定的非线性，因此对这一结构的研究具有一定的难度。